Tamil-Sri LankaEnglish (United Kingdom)
This content is only available in English

 

New Standards

SLS 1531 : 2016
Guidelines for Hair and beauty industry

SLS 1532 : 2016
Cable reels for household and similar purposes (IEC 61242 : 1995, Amd No. 1 : 2008, Amd No. 2 : 2015)

SLS 1533 : 2017
General purpose fuse links for domestic and similar purposes (primarily for use in plugs)

SLS 1534 : 2016
Instant noodles

SLS 1535 : 2016
Aluminium sulphate for purification of drinking water supplies

SLS 1536 : 2016
Water based enamel paints

SLS 1537 : 2016
Synthetic resin based automotive spray paint

SLS 1538 : 2016
Nitrocellulose resin based automotive spray paint

SLS 1539 : 2016
Compostable plastic (ISO 17088 : 2012)

SLS 1540 : 2016
Polypropylene drinking straws (ISO 18188 : 2016)

SLS 1541 : 2016
Terms and definitions for paints and varnishes (ISO 4618 : 2014)

SLS 1542 : 2016
Electric cable for photovoltaic systems (EN 50618: 2014)

SLS 1543 - 1 : 2016
Safety of power converters for use in photovoltaic power systems - general requirements ( IEC 62109 - 1 : 2010)

SLS 1543 - 2 : 2016
Safety of power converters for use in photovoltaic power systems - particular requirements for inverters (IEC 62109 - 2 : 2011)

SLS 1544 - 1 : 2016
Terrestrial photovoltaic (pv) modules – design qualification and Type approval - test requirements (IEC 61215 - 1 : 2016)

SLS 1544 - 1-1 : 2016
Terrestrial photovoltaic (pv) modules – design qualification and Type approval - special requirements for testing of crystalline silicon photovoltaic (pv) modules (IEC 61215-1-1 : 2016)

SLS 1544 - 2 : 2016
Terrestrial photovoltaic (pv) modules – design qualification and Type approval - test procedures (IEC 61215-2 : 2016)

SLS 1545 - 1 : 2016
Photovoltaic (pv) module performance testing and energy Rating - irradiance and temperature performance measurements and power rating (IEC 61853-1 : 2011)

SLS 1545 - 2 : 2017
Photovoltaic (pv) module performance testing and energy rating - spectral responsivity, incidence angle and module operating temperature measurements ( IEC 61853-2: 2016)

SLS 1546 : 2016
Photovoltaic systems power conditioners - procedure for measuring efficiency (IEC 61683 : 1999)

SLS 1547 : 2016
Photovoltaic (pv) systems – characteristics of the utility interface  (IEC 61727 : 2004)

SLS 1548 : 2016
Composite kraft board sacks for packaging of bulk tea

SLS 1549 - 1 : 2016
Methods of test for cereals, pulses and derived products pulses - determination of moisture content – air-oven method(ISO 24557 : 2009)

SLS 1549 - 2 : 2016
Methods of test for cereals, pulses and derived products - determination of the nitrogen content and calculation of the crude Protein content – kjeldahl method (ISO 20483 : 2013)

SLS 1549 - 3 : 2016
Methods of test for cereals, pulses and derived products - cereals, cereal-based products and animal feeding stuffs – determination  of crude fat and total fat content by the randall extraction method ( ISO 11085 : 2015)

SLS 1549 - 4 : 2016
Cereals, pulses and derived products - determination of ash yield by incineration ( ISO 2171 : 2007)

SLS 1550 : 2016
Method of test for Determination of cadmium content of paper, board and pulps (atomic absorption spectrometric method) ( ISO 10775 : 2013)

SLS 1551: 2016
Principle criteria and indicator for sustainably produced fuelwood

SLS 1552: 2017
Cartridge fuse links (rated at up 5 amperes) for a.c and d.c service

SLS 1553 - 1: 2017
Photovoltaic (pv) module safety qualification - requirements for construction (IEC 61730-1: 2016)

SLS 1553 - 2: 2017
Photovoltaic (pv) module safety qualification - requirements for testing (IEC 61730-2: 2016)

SLS 1554 - 1: 2017
Low-voltage switchgear and controlgear - general rules (IEC 60947-1: 2014)

SLS 1554 - 2: 2017
Low-voltage switchgear and controlgear - circuit – breakers(IEC 60947-2: 2016)

SLS 1554 - 3: 2017
Low-voltage switchgear and controlgear - switches,  disconnectors, switchdisconnectors and fuse -combination units( IEC 60947-3: 2015)

SLS 1555:2017
Palm kernel olein

SLS 1556:2017
Palm kernel stearin

SLS 1557 : 2017
Biodegradable plastics

SLS 1558 - 1 : 2017

Tests for microbiology of milk and milk products - enumeration of colony-forming units of yeasts and / or moulds – colony Counts technique at 25 0C (ISO 6611:2004)

SLS 1558- 2- 1 :2017

Tests for microbiology of milk and milk products - enumeration of presumptive escherichia coli - most probable number technique using for methylumbelliferyl – ?-D-glucuronide (mug)  (ISO 11866 -1: 2005)

SLS 1558 – 2- 2:2017

Tests For Microbiology Of Milk And Milk Products. - Enumeration Of Presumptive Escherichia Coli - Colony Count Technique At 44 0C Using Membranes
(ISO 11866 - 2: 2005)

SLS 1558 - 3 : 2017

Tests for microbiology of milk and milk products -  identification of characteristic microorganisms of yoghurt (Lactobacillus delbrueckii subsp. Bulgaricus and streptococcus thermophilus)(ISO 9232:2003)

SLS 1558 - 4 : 2017
Tests For Microbiology Of milkand Milk Products - Yoghurt – Enumeration Of Characteristic Microorganisms – Colony-Count Technique At 37 0C (ISO 7889:2003)

SLS 1559 - 1:2017
Symbols and abbreviated terms for plastics - basic polymers and their special characteristics (ISO 1043-1:2011)

SLS 1559 - 2 : 2017
Symbols and abbreviated terms for plastics - fillers and reinforcing materials (ISO 1043-2:2011)

SLS 1559 - 3 : 2017
Symbols and abbreviated terms for plastics - plasticizers (ISO 1043-3:2016)

SLS 1559 - 4 : 2017
Symbols and abbreviated terms for plastics - flame retardants (ISO 1043-4:1998)

SLS 1560 : 2017
Generic identification and marking of plastics products (ISO 11469:2016)

SLS 1561: 2017
Microbiology - cosmetics - guidelines for the application of iso  standards on cosmetic microbiology (ISO/TR 19838:2016)

SLS 186 - 12 : 2016
Methods of test for Spices and condiments - determination of degree of fineness of Grinding - hand sieving method (reference method) 
(ISO 3588 : 1977)

SLS 186 - 13 : 2016
Methods of test for Spices and condiments - turmeric - determination of Colouring power – spectrophotometric Method (ISO 5566 : 1982)

SLS 516 - 15 - 1 : 2016
Microbiology of food and animal Feeding stuffs – horizontal method for the Detection and enumeration of Listeria monocytogenes - Detection method (ISO 11290-1 : 1996, AMD No.1 : 2004)

SLS 516 - 15 - 2 : 2016
Microbiology of food and animal Feeding stuffs - horizontal method for the detection and Enumeration of Listeria monocytogenes - Enumeration method (ISO11290-2 : 1998, AMD No. 1 : 2004)

SLS 1256 - 38 : 2017
Method of Test for paints and varnishes - determination of the effect of heat (ISO 3248:2016)

SLS 1256 - 39 : 2016
Method of Test for Paints and varnishes - determination of adhesion by pull off test ( ISO 4624 : 2016)

SLS 1371 - 3 : 2016
Methods of test for Tissue paper and tissue products - determination of thickness,Bulking thickness and apparent bulk Density and bulk ( ISO 12625 - 3 : 2014)

SLS 1371 – 4 - 1 : 2016
Methods of test for Tissue paper and tissue products - determination of optical Properties - measurement of brightness and Colour with d 65/100 (outdoor daylight) ( ISO 12625 -7 : 2014)

Revisied Standards
SLS 735- 14 : 2017
Methods of Tests for milk and milk products - determination of  total solids content of ice-cream and milk ice (reference method) (ISO 3728: 2004)

SLS 735 - 15:2017
Methods of Tests for milk and milk products - determination of total solid content in yoghurt (reference method) (ISO 13580:2005)

SLS 735- 16:2017
Methods of Tests for milk and milk products - determination of total solids content of milk, cream and evaporated milk  (reference method) (ISO 6731:2010)

SLS 735 - 17:2017
Methods of Test for milk and milk products - determination of the benzonic and sorbic acid contents  (ISO 9231 : 2008)

SLS 735 - 18 : 2017
Methods of Test for milk and milk products - determination of the total solids content of cheese and processed cheese  (reference method) (ISO 5534:2004)

SLS 824:PART 1:2017
Fermented milk products - curd (First revision)

SLS 1329:2017
Methods of Test for the determination of hardness (indentation technique) for flexible cellular polymeric materials (First revision)
(ISO 2439:2008)

SLS 679 : 2016
Method of testing of Paper for tearing resistance (Third revision) (ISO 1974 : 2012)

SLS 680 : 2016
Methods of Test for Determination of bursting Strength of board (second revision) (ISO 2759 : 2014)

SLS 1270 : 2016
Methods of Test for Determination of water Absorptiveness (cobb method) of Paper and board (First revision) (ISO 535 : 2014)

SLS 1370 : 2016
Methods of Test for Determination of thickness, Density and specific volume of Paper and board (first revision) (ISO 534 : 2011)

SLS 2 : 2016
Clay roofing tiles (Second Revision)

SLS 164 : 2017
Bayonet cap adaptors (lampholder plugs) (First Revision)

SLS 223 : 2017
Ice cream (Second Revision)

SLS 234 : 2016
Beer (Second Revision)

SLS 313 – 3- 5 : 2016
Methods for Analysis of animal and vegetable Fats and oils - determination of foreign substances and Parameters affecting quality and stability - Determination of moisture and volatile matter content (Third Revision) (ISO 662 : 2016)

SLS 313 – 3- 8 : 2016
Methods for Analysis of animal and vegetable Fats and oils - determination of foreign substances and Parameters affecting quality and stability - Determination of anisidine value ( Third Revision) (ISO 6885 : 2016)

SLS 523 : 2016
Method of sampling for Paints, varnishes and raw Materials for paints and varnishes (Second revision) (ISO 15528 : 2013)

SLS 533:2017
Emulsion paints for interior use (Second revision)

SLS 557:2017
Emulsion paints for exterior use  (Second revision)

SLS 733 : 2016
Electric cables – pvc insulated and pvc sheathed cables for voltages up to and including 300/500 v, for electric power and lighting (Third Revision)

SLS 734 - 1 : 2017
13A plugs, socket-outlets, adaptors and connection units - specification for rewirable and non-rewirable 13A fused plugs (second revision)

SLS 734 - 2 : 2017
13A plugs, socket-outlets, adaptors and connection units - specification for 13A switched and unswitched socket-outlets (second revision)

SLS 734 - 3 : 2017
13A plugs, socket-outlets, adaptors and connection units - specification for adaptors

SLS 814 - 2 : 2016
Electric fans - safety requirements (Second Revision) (IEC 60335-2-80 : 2015)

SLS 866 : 2016
Sodium carbonate (First Revision)

SLS 907 - 4 : 2016
Hot rolled structural steel sections Part 4 :  L Sections ( Equal and unequal angles) (First revision)

SLS 1006 - 1 : 2016
Steels for structural and general engineering purposes Part 1 : Structural steels (First revision)

SLS 1175:2016
Circuit breakers for Overcurrent Protection for household and Similar installations (Second revision)

SLS 1198 - 1 : 2016
Primary cells and batteries - general requirements(Second revision) (IEC 60086-1 : 2015)

SLS 1198 - 2 : 2016
Primary cells and batteries - specification sheets(Second Revision) (IEC 60086-2 : 2015)

SLS 1220 : 2016
Bathing bars (First Revision)

SLS 1256 - 1 : 2016
Paints and varnishes - examination and preperation of samples for Testing (First revision) (ISO 1513 : 2010)

SLS 1256 - 16 : 2016
Paints and varnishes - determination of fineness of grind (First revision) (ISO 1524 : 2013)

SLS 1256 - 20 - 1 : 2016
Paints and varnishes - determination of scratch Resistance - constant loading method (ISO 1518 : PART 1 : 2011)

SLS 1256 - 20  - 2 : 2016
Paints and varnishes - determination of scratch resistance section - variable loading method (ISO 1518 : Part 2 : 2011)

SLS 1256 - 22 : 2016
Paints and varnishes - cross cut test(second revision) (ISO 2409 : 2013)

SLS 1270 : 2016
Method of test for determination of water Absorptiveness (Cobb method) of Paper and board(First revision)  (ISO 535 : 2014)

SLS 1256 - 28- 1:2016
Paints and varnishes - exposure to laboratory light Sources - general guidance (ISO 16474-1 : 2013)

SLS 1271 : 2016
Paper and board for tensile strength after immersion in water (first revision) (ISO 3781 : 2011)

SLS 1292 -1: 2017
Design and construction of Biogas systems - domestic biogas systems (first revision)

SLS 1329:2017
The determination of hardness (indentation technique) for Flexible cellular polymeric Materials (first revision) (ISO 2439:2008)

SLS 1350 : 2016
The detection of Pseudomonas aeruginosa in Cosmetics(First Revision) (ISO 22717 : 2015)

SLS 1351 : 2016
The detection of Staphylococcus aureus in Cosmetics(first revision) (ISO 22718 : 2015)

SLS 1489 : 2016
The detection of Escherichia coli in Cosmetics (first revision) (ISO 21150 : 2015)

SLS 1488 : 2016
The detection of Candida albicans in Cosmetics (first revision) (ISO 18416 : 2015)


Adopted Standards

SLS ISO 1856:2017
Flexible cellular polymeric materials - determination of fatigue compression set (ISO 1856:2000)

SLS ISO 2440:2017
Flexible and rigid cellular polymeric materials - accelerated ageing tests  (ISO 2440:1997)

SLS ISO 3385:2017
Flexible cellular polymeric materials - determination of fatigue by constant-load pounding (ISO 3385:2014)

SLS ISO 8124-3:2017
Safety of toys – migration of certain elements (ISO 8124-3:2010)

SLS ISO 12787 : 2017
Cosmetics – analytical methods – validation criteria for analytical results using chromatographic techniques  (ISO 12787:2011)

SLS ISO/TR 17276 : 2017
Cosmetics – analytical approach for screening and quantification methods for heavy metals in cosmetics (ISO/TR 17276 : 2014)

SLS EN 1994-2: 2017
Eurocode 4 - Design of composite steen and concrete structures - General rules and rules for bridges (EN 1994-2:2005, AC:2008)

SLS EN 1999-1-2: 2017
Eurocode 9 - Design of aluminium structures - Structural fire design  ( EN 1999-1-2:2007, AC:2009)

SLS EN 1999-1-3: 2017
Eurocode 9: Design of aluminium structures - Structures susceptible to fatigue

SLS EN 1999-1-4: 2017
Eurocode 9 - Design of aluminium structures - Cold formed structural sheeting (EN 1999-1-4:2007,A1 :2011,AC: 2009)

SLS EN 1999-1-5: 2017
Eurocode 9: Design of aluminium structures - Shell structures (EN 1999-1-5:2007,AC: 2009)

SLS EN 365 : 2017
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging (EN 365:2004)

SLS EN 413-2:2017
Masonry cement – Test methods (EN 413-2 :2016)

SLS EN 1090-1:2017
Execution of steel structures and aluminium structures - Requirements for conformity assessment of structural components(EN 1090-1:2009+A1:2011)

SLS EN 1090-2:2017
Execution of steel structures and aluminium structures - Technical requirements for steel structures (EN 1090-2: 2008+A1:2011)

SLS EN 1090-3:2017
Execution of steel structures and aluminium structures - Technical requirements for aluminium structures (EN 1090-3:2008)

SLS EN 12878:2017
Pigments for the colouring of building materials based on cement and/or lime – Specifications and methods of test (EN 12878:2014)

SLS ISO 1461 : 2017
Hot dip galvanized coatings on Fabricated iron and steel Articles - specifications and test Methods (ISO 1461:2009)

SLS ISO 12944 - 1 : 2017
Paints and varnishes – corrosion Protection of steel structures by Protective paint systems – general introduction (ISO 12944-1:1998)

SLS ISO 12944 - 2 : 2017
Paints and varnishes – corrosion Protection of steel structures by Protective paint systems – classification of environments (ISO 12944-2:1998)

SLS ISO 12944 - 3 : 2017
Paints and varnishes – corrosion Protection of steel structures by Protective paint systems – design considerations (ISO 12944-3:1998)

SLS ISO 12944 - 4 : 2017
Paints and varnishes – corrosion Protection of steel structures by Protective paint systems – types of surface and surface Preparation (ISO 12944-4:1998)

SLS ISO 12944 - 5:2017
Paints and varnishes – corrosionn Protection of steel structures by Protective paint systems – protective paint systems (ISO 12944-5 :2007)

SLS ISO 12944 - 6:2017
Paints and varnishes – corrosion Protection of steel structures by Protective paint systems – laboratory performance test Methods (ISO 12944-6:1998)

SLS ISO 12944 - 7 : 2017
Paints and varnishes – corrosion Protection of steel structures by Protective paint systems – execution and supervision of paint Work (ISO 12944-7:1998)

SLS ISO 12944 - 8 : 2017
Paints and varnishes – corrosion Protection of steel structures by Protective paint systems – development of specifications for New work and maintenance (ISO 12944-8:1998)

SLS ISO 14713-1:2017
Zinc coatings - guidelines and Recommendations for the Protection against corrosion of Iron and steel in structures - general principles of design and Corrosion resistance (ISO 14713-1:2009)

SLS ISO 14713-2:2017
Zinc coatings - guidelines and Recommendations for the Protection against corrosion of Iron and steel in structures – hot dip galvanizing (ISO 14713-2:2009)

SLS ISO 14713-3:2017
Zinc coatings - guidelines and Recommendations for the Protection against corrosion of Iron and steel in structures – sherardizing (ISO 14713-3:2009)

SLS ASTM C474-15 : 2017
Joint treatment materials for Gypsum board construction (ASTM C474-15)

SLS ASTM D4541-09 : 2017
Ull-off strength of coatings Using portable adhesion testers (ASTM D4541-09)

SLS ASTM D4 : 2017
Bitumen Content (ASTM D4-86(2010))

SLS ASTM D5 : 2017
Penetration of bituminous Materials (ASTM D5/D5M -13)

SLS ASTM D6 : 2017
Loss on heating of oil and Asphaltic compounds (ASTM D6/D6M-95(2011)e1)

SLS ASTM D 36: 2017
Softening point of bitumen (ring-and-ball apparatus) (ASTM D36/D36M-14e1)

SLS ASTM D 92: 2017
Flash and fire points by Cleveland open cup tester (first revision) (ASTM D92-16b)

SLS ASTM D 140:2017
Sampling asphalt materials (first revision) (ASTM D140/D140M-16)

SLS ASTM D2042: 2017
Solubility of asphalt materials in Trichloroethylene (ASTM D2042-15)

SLS ASTM D2170 : 2017
Kinematic viscosity of asphalts (bitumens) (ASTM D2170/D2170M-10)

SLS ASTM D7553:2017
Solubility of asphalt materials In n-propyl bromide (ASTM D7553-15)

SLS ASTM D70:2017
Density of semi-solid bituminous Materials (pycnometer method) (ASTM D70-09e1)


Withdrawn Standards

SLS 1143:2008

SLS 473: 1979

SLS 563:1982

SLS 606:1983


Amendments

AMD 484
SLS 1161 : 2003

AMD 485
SLS 1427 : 2011

AMD 486
SLS 1146 : 2001

AMD 487
SLS 342:2001

AMD 488
SLS 1218 : 2001

AMD 489
SLS 701 : 1985

AMD 490
SLS 1178 : 2013

AMD 491
SLS 1504-1: 2015

පුවත් සහ සිද්ධීන්

  • 1
  • 2
New Sri Lanka Standards Catalogue This content is only available in English    The new  Sri Lanka Standards Catalogue has been published and is available for sale at the SL... Read more
National Quality Awards-2015 This content is only available in English    Congratulations to award winners ! National Quality Awards-2015WINNERS Service - Large Cate... Read more

© ශ්‍රී ලංකා ප්‍රමිති ආයතනය. සියලු හිමිකම් ඇවිරිණි
17 වික්ටෝරියා ස්ථානය, ඇල්විටිගල මාවත, කොළඹ 08.

නිමැවුම සහ සම්බන්ධීකරණය