Tamil-Sri LankaEnglish (United Kingdom)
brand viagra anti PREMATURE EJACULATION brege siberi igi2 exe maazeeseries49 40oz to freedom luis miguel por debajo legrande michel star defender full rar com scoreboard futured episode spring break sex wmv avi mp4 rmvb mpg mpeg intructor kid rock roll jesus ash burn com before you do ludacris garrett tapa dead by sunrise crawl back in pieces dreams xord

New and revised Sri Lanka Standards

This content is only available in English

 

NEW SRI LANKA STANDARDS AND REVISIONS - 2014

SLS 43 Part 1 : 2014    Determination of tensile properties of fabrics - Determination of maximum force using the strip method (Second revision)

SLS 43 Part 2 : 2014    Determination of tensile properties of fabrics - Determination of maximum force using the grab method (Second revision)

SLS 79 : 2014        Specification for food grade salt (granular form) (Second revision)

SLS 80 : 2014        Specification for food grade salt (powdered form) (First revision)

SLS 275 : 2014        Specification for toothpaste (Third revision)

SLS 287 Part 1: 2014    Method for determination of water repellency and resistance to water penetration of fabrics - Resistance to surface wetting (spray test) (First revision)

SLS 297 Part 2 : 2014    Method of testing vulcanized rubber - Determination of tensile stress strain properties (Third revision)

SLS 313 Part 2 Section 1 : 2014    Methods for analysis of animal and vegetable fats and oils - Determination of chemical characteristics - Determination of saponification value (Third revision)

SLS 313 Part 2 Section 2 : 2014    Methods for analysis of animal and vegetable fats and oils - Determination of chemical characteristics - Determination of iodine value (Third revision)

SLS 389 : 2014    Skin powders (Second revision)

SLS 404 Part 9 : 2014    Methods for physical and mechanical test of leather - Sample preparation and conditioning (First revision)

SLS 484 Part 9 : 2014    Methods of test for raw natural rubber - Determination of volatile matter content by thermigravimetric method using an automatic analyzer with an infrared drying unit

SLS 484 Part 10 : 2014     Methods of test for raw natural rubber - Determination of volatile matter content by hot-mill method and oven method

SLS 591 : 2014    Canned Fish (First revision)

SLS 618 : 2014    Urea (fertilizer grade) (First revision)

SLS 620 : 2014    Ammonium sulphate (fertilizer grade) (First revision)

SLS 644 : 2014     Potassium chloride (fertilizer grade) (First revision)

SLS 678 : 2014    Method for Testing of paper for bursting Strength (Second revision)

SLS 742 : 2014    Skin creams and lotions for babies (First revision)

SLS 743 : 2014     Skin creams and lotions (First revision)

SLS 748 : 2014    Ground rock - phosphate (fertilize grade) (First revision)

SLS 761 Part 7 Section 1 : 2014    Methods of test for rubber or plastic coated fabrics - Determination of bursting strength - Steel ball method (Second revision)

SLS 761 Part 7 Section 2 : 2014    Methods of test for rubber or plastic coated fabrics - Determination of bursting strength - Hydraulic method (Second revision)

SLS 812 : 2014    Triple super – phosphate (fertilizer grade) (First revision)

SLS 823 : 2014    Specification for dolomite (fertilizer grade) (First revision)

SLS 890 : 2014    Pneumatic tyres for motorcycles and scooters (First revision)

SLS 1360 : 2014    Definitions for non wovens (First revision)

SLS 1387 Part 50 : 2014    Methods of test for colour fastness of textiles - Colour fastness to artificial light : xenon arc fading  lamp test

SLS 1388 Part  22 : 2014  Method of test for quantitative chemical analysis of textiles - Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (Method using formic acid and zinc chloride)

SLS 1388 Part 24 : 2014    Method of test for quantitative chemical analysis of textiles - Mixtures of polyester and certain other fibres (Method using phenol and tetrachloroethane)

SLS 1388 Part 26 : 2014    Method of test for quantitative chemical analysis of textiles - Mixtures of melamine and cotton or aramide fibres  (Method using hot formic acid)

SLS 1458 Part 2 : 2014    Specification for self- ballasted led lamps for general lighting services with supply voltages > 50 v - Performance requirements

SLS 1461 Part 2 Section 1 : 2014 Microbiological test methods for water - Enumeration of culturable mico-organisms - Colony count by inoculation in a nutrient agar culture medium

SLS 1478 : 2014    Method on selection and cutting of specimens for physical test of machine-made textile floor coverings

SLS 1479 : 2014    Method of test for determination of Thickness of pile above the substrate of textile floor coverings

SLS 1480 : 2014    Method of test for determination of thickness of machine-made textile floor coverings

SLS 1481 : 2014    Methods of test for determination of certain physical and mechanical properties of fibre ropes

SLS 1482 : 2014    Generic names for man-made fibres for textiles

SLS 1483: 2014    Generic names and definitions for natural textile fibres

SLS 1484 Part 1 : 2014    Sensory analysis of food - Method of investigating sensitivity of taste

SLS 1484 Part 2 : 2014    Sensory analysis of food - Method of initiation and training of assessors in the detection and recognition of odours

SLS 1484 Part 3 : 2014    Sensory analysis of food - General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors

SLS 1484 Par 4 : 2014    Sensory analysis of food - General guidance for the design of test rooms

SLS 1485 : 2014    Woven mattress covers

SLS 1486 Part 1 : 2014    Woven cotton towels and toweling - Terry towels

SLS 1487 : 2014 Good manufacturing practice (GMP) for coir fibre pith substrate

SLS 1488 : 2014    Detection of candida albicans  in cosmetics

SLS 1489 : 2014    Detection of escherichia coli  in cosmetics

SLS 1490 Part 1 : 2014    Determination of the slippage resistance of yarns at seam in woven fabrics - Fixed seam opening method

SLS 1490 Part 2 : 2014     Determination of the slippage resistance of yarns at seam in woven fabrics - Fixed load method

SLS 1490 Part 3 : 2014    Determination of the slippage resistance of yarns at seam in woven fabrics - Needle clamp method

SLS EN 1991 Part 1-3 : 2014    Eurocode 1 - Action on structures - General actions - Snow loads
SLS EN 1991 Part 1-4 : 2014    Eurocode 1 - Action on structures - General actions Wind actions
SLS EN 1991 Part 1-5 : 2014    Eurocode 1 - Action on structures - General actions - Thermal actions
SLS EN 1991 Part 1-6 : 2014    Eurocode 1 - Action on structures - General actions - Actions during execution
SLS EN 1991 Part 1-7 : 2014    Eurocode 1 - Action on structures - General actions - Accidental actions
SLS EN 1991 Part 2 : 2014    Eurocode 1 - Actions on structures - Traffic loads on bridges
SLS EN 1992 Part 2 : 2014    Eurocode 2 - Design of concrete stractures - Concrete bridges - Design and detailing rules
SLS EN 1993 Part 1-1 : 2014    Eurocode 3 - Design of steel structures - General rules and rules for buildings

SLS EN 1993 Part 1-8 : 2014    Eurocode 3 - Design of steel structures - Design of joints
SLS EN 1993 Part 1-9 : 2014    Eurocode 3 - Design of steel structures - Fatigue
SLS EN 1993  Part 2 : 2014    Eurocode 3 - Design of steel structures - Steel Bridges
SLS EN 1993 Part 3-1 : 2014    Eurocode 3 - Design of steel structures - Towers, masts and chimneys - Towers and masts
SLS EN 1993 Part 3-2 : 2014    Eurocode 3 - Design of steel structures - Towers, masts and chimneys – chimneys
SLS EN 1996 Part 1-1 : 2014    Eurocode 6 - Design of masonry structures - General rules for reinforced and unreinforced masonry structures
SLS EN 1996 Part 2 : 2014    Eurocode 6 - Design of masonry structures - Design considerations, selection of materials and execution of masonry
SLS EN 1996 Part 3 : 2014    Eurocode 6 - Design of masonry structures - Simplified calculation methods for unreinforced masonry structures
SLS EN 1997 Part 1 : 2014    Eurocode 7: Geotechnical design - General rules
SLS EN 1997 Part 2 : 2014     Eurocode 7: Geotechnical design - Ground investigation and testing
SLS EN 1998 Part 3 : 2014    Eurocode 8 : Design of structures for earthquake resistance - Assessment and retrofitting of buildings
SLS EN 1998 Part 4 : 2014    Eurocode 8 : Design of structures for earthquake resistance - Silos, tanks and pipelines
SLS EN 1998 Part 5 : 2014    Eurocode 8 : Design of structures for earthquake resistance - Foundations, retaining structures and geotechnical aspects
SLS EN 1998 Part 6 : 2014    Eurocode 8 : Design of structures for earthquake resistance - Towers, masts and chimneys

SLS ISO 10231 : 2014    Motorcycle tyres - test methods for verifying tyre capabilities

SLS ISO 15189 : 2014    Medical laboratories – requirements for quality and competence (First revision)

SLS ISO/ TS 22002 Part 1 : 2014    Prerequisite programmes on food safety - Food manufacturing
SLS ISO/ TS 22002 Part 2 : 2014    Prerequisite programmes on food safety - Catering
SLS ISO/ TS 22002 Part 3 : 2014    Prerequisite programmes on food safety - Farming
SLS ISO/ TS 22002 Part 4 : 2014    Prerequisite programmes on food safety - Food packaging manufacturing
SLS ISO / TS 22003 : 2014    Food safety management systems – requirements for bodies providing audit and certification of food safety management systems
SLS ISO/ TS 22004 : 2014    Food safety management systems – guidance on The application of ISO 22000 : 2005
SLS ISO 22005 : 2014     Traceability in the feed and food chain – general principles and basic requirements for system design and implementation

SLS IEC 60811-100 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 100 : General
SLS IEC 60811-201 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 201 : General tests – Measurement of insulation thickness
SLS IEC 60811-202 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 202 : General tests–Measurement of thickness of non-metallic sheath
SLS IEC60811-203 : 2014        Electric and optical fibre cables test methods for non-metallic materials Part 203 : General tests–Measurement of thickness of overall dimensions
SLS IEC 60811-301 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 301 : Electrical tests – Measurement of the permittivity at 23 º C of filling compounds
SLS IEC 60811-302 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 302 : Electrical tests – Measurement of the d.c. resistivity at 23 º C and 100 º C of filling compounds
SLS IEC 60811-401 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 401 : Miscellaneous tests–Thermal ageing methods-Ageing in an Air oven
SLS IEC 60811-402 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 402: Miscellaneous tests–Water absorption tests
SLS IEC 60811-403 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 403 : Miscellaneous tests–Ozone resistance test on cross - linked compounds
SLS IEC 60811-404 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 404 : Miscellaneous tests – Mineral oil immersion tests for sheaths
SLS IEC 60811-405 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 405: Miscellaneous tests–Thermal stability test for PVC insulations and PVC sheaths
SLS IEC 60811-406 : 2014    Electric and optical fibre cables Test methods for non-metallic materials Part 406: Miscellaneous tests – Resistance to stress cracking of polyethylene and                                                       polypropylene compounds
SLS IEC 60811-407 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 407 : Miscellaneous tests–Measurement  of mass increase of polyethylene and  polypropylene compounds
SLS IEC 60811-408 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 408 : Miscellaneous tests–Long-term stability test of polyethylene and polypropylene compounds
SLS IEC 60811-409 : 2014     Electric and optical fibre cables test methods for non-metallic materials Part 409 : Miscellaneous tests–Loss off mass test for thermoplastic insulations and sheaths
SLS IEC 60811-410 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 410 : Miscellaneous tests–Test methods for copper–catalyze oxidative     degradation of polyolefin insulated conductors.
SLS IEC 60811-411 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 411 : Miscellaneous tests–Low-temperature brittleness of filling compounds
SLS IEC 60811-412 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 412 : Miscellaneous tests–Thermal ageing methods-Ageing in an air bomb
SLS IEC 60811-501 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 501 : Mechanical tests–Tests for determining the mechanical properties of insulating and sheathing compounds
SLS IEC 60811-502 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 502 : Mechanical tests–Shrinkage test for insulations
SLS IEC 60811-503 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 503 : Mechanical tests–Shrinkage test for sheaths
SLS IEC 60811-504 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 504 : Mechanical tests–Bending tests at low temperature for insulation and sheaths
SLS IEC 60811-505 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 505 : Mechanical tests – Elongation at low temperature for insulations and sheaths
SLS IEC 60811-506 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 506 : Mechanical tests–Impact test at low temperature for insulations and sheaths
SLS IEC 60811-507 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 507: Mechanical tests – Hot set test for cross-linked materials
SLS IEC 60811-508 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 508 : Mechanical tests–Pressure test at high temperature for insulation and sheaths
SLS IEC 60811-509 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 509 : Mechanical tests – Test for resistance of insulations and sheaths to   cracking (heat shock test)
SLS IEC 60811-510 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 510 : Mechanical tests–Methods specific to polyethylene and polypropylene compounds-wrapping test after thermal ageing in air
SLS IEC 60811- 511 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 511: Mechanical tests – Measurement of the melt flow index of polyethylene compounds.
SLS IEC 60811-512 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 512 : Mechanical tests–Tensile strength and elongation at break after conditioning at elevated temperature
SLS IEC 60811-513 : 2014     Electric and optical fibre cables test methods for non-metallic materials Part 513 : Mechanical tests–Methods specific to polyethylene and polypropylene compounds-Wrapping test after conditioning
SLS IEC 60811-601 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 601 : Physical tests–Measurement of the drop point of filling compounds
SLS IEC 60811-602 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 602 : Physical tests–Separation of oil in filling compounds
SLS IEC 60811-603 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 603: Physical tests – Measurement of total acid number of filling compounds
SLS IEC 60811-604 : 2014     Electric and optical fibre cables test methods for non-metallic materials Part 604: Physical tests – Measurement of absence of corrosive components in filling compounds
SLS IEC 60811-605 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 605 : Physical tests–Measurement of carbon black and/or mineral filler in polyethylene compounds
SLS IEC 60811-606 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 606 : Physical tests–Methods of determining the density
SLS IEC 60811-607 : 2014    Electric and optical fibre cables test methods for non-metallic materials Part 607 : Physical tests–Test for the assessment of carbon black dispersion in polyethylene and polypropylene.

 

 

පුවත් සහ සිද්ධීන්

  • 1
  • 2
  • 3
  • 4
  • 5
තේ නිෂ්පාදිත සහතික කිරිමේ යෝජනා ක්‍රම තේ නිෂ්පාදිත සහතික කිරිමේ යෝජනා ක්‍රම ශ්‍රී ලංකා ප්‍රමිති ආයතනය ශ්‍රි ලංකා තේ මණ්ඩලය හා එක්ව නිෂ්පාදන ක්‍රියාවලිය හා අවසාන නිෂ්පාදිතය,ප උදා: කළු තේ සහතික කිරීම පිණිස නිෂ්පාදිත සහ... Read more
Training Programme on Energy Management Systems -ISO 50001:2011 This content is only available in English    Training Programme on Energy Management Systems as per ISO 50001:20112015-02-25 to 2015-02-27... Read more
Diploma in food quality management - 2015 This content is only available in English    Diploma in food quality management - 2015       Read more
National Quality Award Training Programme This content is only available in English  Training Programme on Criteria for performance excellence for National Quality Awards (SLNQA)  ... Read more
Training Programme on Occupational Health and Safety Management Systems This content is only available in EnglishTraining Programme on Occupational Health and Safety Management Systems   Read more

© ශ්‍රී ලංකා ප්‍රමිති ආයතනය. සියලු හිමිකම් ඇවිරිණි
17 වික්ටෝරියා ස්ථානය, ඇල්විටිගල මාවත, කොළඹ 08.

නිමැවුම සහ සම්බන්ධීකරණය