Draft Sri Lanka Standards/Amendments For Public Comments

Draft standards for public comments - Engineering Standardization

01.        Draft Sri Lanka Standard Specification for Gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 1: Metallic Materials (ISO 11114: Part 1)

02.       Draft Sri Lanka Standard Specification for Gas cylinders - Compatibility of cylinder and valve materials with gas contents – Part 2: Non-Metallic Materials (ISO 11114: Part 2)

03.       Draft Sri Lanka Standard Specification for Gas cylinders – Terminology (ISO 10286: 2015)

04.       Draft Sri Lanka Standard Specification for Gas cylinders –Non destructive testing – Qualification and Certifications of NDT personals (ISO 9712: 2012)

05.       Draft Sri Lanka Standard Specification for Gas cylinders – cylinder valves – Specification and type testing (ISO 10297: 2014)

06.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Part 1: Design principle for safety signs and safety markings (ISO 3864 -1: 2011)

07.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Part 2: Design principle for product safety labels (ISO 3864 – 2: 2016)

08.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Part 3: Design principle for use in safety signs (ISO 3864 – 3: 2016)

09.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Part 4: Colorimetric and photometric properties of safety sign materials (ISO 3864 – 4: 2012)

10.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – Registered safety signs (ISO 7010: 2011)

11.       Draft Sri Lanka Standard Specification for Graphical symbols – Safety colours and safety signs – safety way guidance systems (SWCS) (ISO 16069: 2017)

12.      Draft Sri Lanka Standard Specification for Crankcase lubricating oils for internal combustion diesel engines SLS 1373 (First Revision)

13.      Draft Sri Lanka Standard Specification for Crankcase lubricating oils for internal combustion gasoline engines SLS 1374 (First Revision)

14.       Draft Sri Lanka Standard Specification for Gear lubricants (Extreme pressure gear oil) SLS 1396 (First Revision)

15.      Draft Sri Lanka Standard Specification for four Stroke cycle gasoline engine lubricating oil SLS 1409 (First Revision)

16.      Draft Sri Lanka Standard Specification for Two – stroke cycle gasoline engine lubricanting oil SLS 1446 (First Revision)

 17.       Draft Sri Lanka Standard Specification for House hold and similar electrical appliances – Safety Particular requirements for electric fence energizers (IEC 60335-2-76)

18.       Draft Sri Lanka Standard Specification for Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests (IEC 61558-1)

19.       Draft Sri Lanka Standard Specification for Safety of transformers, reactors, power supply units and combinations thereof – Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units (IEC 61558-2-5)

20.       Draft Sri Lanka Standard Specification for Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications(IEC 62776)

21.       Draft Sri Lanka Standard Specification for Protective helmets for vehicle users SLS 517 (Second Revision)

 The Sri Lanka Standards Institution invites comments from the public and other interested groups, on the above draft standards.

The comments received will be considered by the relevant committees of the Sri Lanka Standards Institution before these draft standards are finalized.

Copies of the above draft standards 12,13,14,15,16 and 21 can be obtained free of charge from the Documentation & information Division of Sri Lanka Standards Institution and also downloadable from www.slsi.lk .Other draft standards can be purchased from the SLSI library

Comments should reach me on or before 2020-12-02

Director General,

Sri Lanka Standards Institution,

No. 17, Victoria Place

Elvitigala Mawatha, Colombo 08

Tel: 011 – 2671567 – 72

E mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

Draft standards for public comments - Scientific Standardization

1. Draft Sri Lanka Standard for Best aquaculture practices requirements for shrimp production. (DSLS ………. : ………..)

2. Draft Sri Lanka Standard Code of practice for storage of paddy. (First Revision) (DSLS 686 : ………..)

The Sri Lanka Standards Institution invites comments from the public and other interested groups, on the above draft standards

The comments received will be considered by the relevant committees of the Sri Lanka Standards Institution before these draft standards are finalized.

Copies of the above draft standards can be obtained free of charge from Scientific StandardizationDivision or Documentation & Information Division of SLSI and also downloadable from www.slsi.lk.

Comments should reach me on or before 2020-12-09

Director General

Sri Lanka Standards Institution

No. 17, Victoria Place

Elvitigala Mawatha, Colombo 08

Tel: 011 – 2671567 – 72

 E mailThis email address is being protected from spambots. You need JavaScript enabled to view it.

 -------------------------------------------------------------------------------------------------------------------------------------------------------------

1)            Draft Sri Lanka Standard Specification for distilled liquor/ spirit drinks Part 1 : Rum   (DSLS……… : ………)

 2)            Draft Sri Lanka Standard Specification for distilled liquor/ spirit drinks   Part 2: Whisky/ whiskey (DSLS……… : ………)

 3)            Draft Sri Lanka Standard Specification for distilled liquor/ spirit drinks  Part 3 : Brandy (DSLS……… : ………)

 4)            Draft Sri Lanka Standard Specification for distilled liquor/ spirit drinks Part 4 : Vodka (DSLS……… : ………)

 5)            Draft Sri Lanka Standard Specification for distilled liquor/ spirit drinks Part 5 : Gin (DSLS……… : ………)

 6)            Draft Sri Lanka Standard Specification for distilled liquor/ spirit drinks Part 6 : Tequila (DSLS……… : ………)

 7)            Draft Sri Lanka Standard Specification for distilled liquor/ spirit drinks Part 7 : Emulated foreign liquor (DSLS……… : ………)

 8)            Draft Sri Lanka Standard Specification for processed grain based food products Part 1 : Multi/ Mixed grain (DSLS……… : ………)

9)      Draft Sri Lanka Standard Specification for processed grain based food products Part 2 : Corn flake (DSLS……… : ………)

10)  Draft Sri Lanka Standard Specification for processed grain based food products Part 3 : Rolled oats (DSLS……… : ………)

 11)  Draft Sri Lanka Standard Specification for processed grain based food products Part 4 : Rice flakes(DSLS……… : ………)

 12)  Requirements for Good Agricultural Practices (GAP) Part 4 : Cocoa, Nutmeg & Clove (DSLS ............. : ………..)

 13)  Draft Sri Lanka Standard Specification for desiccated coconut (Third Revision) (DSLS 98 : ………..)

14)  Draft Sri Lanka Standard Specification for coconut milk powder (First revision) (DSLS 1309 : ………..)

 15)  Draft Sri Lanka Standard Specification for Ceylon cinnamon (Fifth revision) (DSLS 81 : ………..)

 16)        Draft Sri Lanka Standard Specification for anticorrosive metal primer – solvent borne –lead and chromate free (First Revision) (DSLS 918 : ………..)

 17)        Draft amendment No : 01 to SLS 326 : 2015 Sri Lanka Standard Specification for chocolate

 18)        Draft amendment No : 01 to SLS 1509 : 2015 Sri Lanka Standard Specification for cocoa based confectionary

 19)        Draft amendment No : 02 to SLS 928 : 1991 Sri Lanka Standard Specification for kurakkan flour

 

 The Sri Lanka Standards Institution invites comments from the public and other interested groups, on the above draft standards/ amendments.

  The comments received will be considered by the relevant committees of the Sri Lanka Standards Institution before these draft standards/amendment are finalized.

  Copies of the above draft standards/ amendments can be obtained free of charge from Scientific Standardization Division or Documentation & Information Division of SLSI and also downloadable from www.slsi.lk.

 Comments should reach me on or before 2020-10-12.

Director General

Sri Lanka Standards Institution

No. 17, Victoria Place

Elvitigala Mawatha, Colombo 08

Tel: 011 – 2671567 – 72

 E mail: This email address is being protected from spambots. You need JavaScript enabled to view it.